Your shopping bag is empty
Go to the shopKegging
Cobra Dual Tap Font
$270.00
Features:- Dual Tap- Glycol Loop for use with glycol or water chiller- Made from cast brass with chrome plating- 5/8 inch female sockets for attaching shanks To attach a tap to these fonts you will either need the Stainless Short Shank without Barb or the KingLok Font Adaptor and KingLok Tap Shank Adaptor. It is also recommended to use the 8mm Compression Fittings...
Silicone Lid O-ring
$9.95
Silicone O-ring for Lids/Hatch suitable for Cornelius style KegsNote: may come in white or black
Tube Brush
$9.90
These brushes are 8mm diameter and 76cm long so you can feed them into small diameter tube to clean it out.
Keg King Resin Tap Handles
$15.95
Add a bit of flair to your home bar with these Resin Tap handles. They come in a range of colours to suit your home, footy team or personal flair! Colours include: Black, White, Silver, Blue, Yellow, Green & Red
Co2 Charger (mini)
$28.95
Mini Regulated C02 Charger with Guage - For 16g Bulbs Can also attach a Type 30 Nut Adaptor and MFL to barb fitting to run from a Co2 cylinder.
Double Ended Ball Lock Keg Post
$5.95
This double ended cornelius post does not have a spring / poppet. It just has a piece of bar that activates the ball lock disconnect wide open.This double ended post will only work with liquid Ball Lock posts. e.g. The Premium Ball Lock in Black MFL and Barb, the Machined and Cast Stainless Steel disconnects in barb and MFL.
Pin Lock Disconnect - Liquid Barb
$9.95
These pin lock disconnects are the ones that fit onto Coca Cola Kegs. They are called pin lock disconnects because they interlock with the posts on the kegs using 2 or 3 pins. So to attach these to the kegs you push down and then twist the disconnect to engage the collet. The are less popular than ball lock fittings...
Camlock – Type E Male
$9.95
Using a Camlock is a quick way to connect to couplings for use on hoses, pipes, tubing etc and can be used with a wide variety of liquids.
Fermentasuauras Butterfly Dump Valve
$45.00
The new Keg King Fermentasuarus Dump Valve Upgrade is a massive improvement on the older dump valve assemblies. These easier to use, easier to disassemble valves now feature a 125% wider interior diameter, making for simple yeast removal and increased, non-clogging dryhopping capabilities from the collection bottle at the base of the valve. The valve housing now utilises recessed bolts...
1/4 in Ball Valve with Check Valve
$7.95
These ball valves include a built in check valve to not only protect your regulator but also prevent gas or beer migrating from one keg to another. Should only be used with gas, not beer.The manifolds we sell all come standard with 2, 4 or 6 output. These can be converted to 3, 5, or 7 output by simply unscrewing...
1 Way Check Valve with Brass Barbs
$10.95
This handy device will ensure you protect your regulator against reversal of flow in your lines. This one way check valve with brass barbs will suit several different gas lines irrespective of the outside diameter (OD) The diameter of the barbs are 6mm. These will also push straight into our gas line splitters.
Adjustable Pressure Relief Valve with Gauge
$52.00
The Premium Regulated Charger is very compact but is just large enough to house a very small regulator. No need to worry about pressing the trigger on the charger too much or too little, just use the regulator to set the pressure and forget. Simply screw on the MFL threaded disconnect, attach to your keg, and set the dispense pressure. Note:...
