Your shopping bag is empty
Go to the shopAccessories - Kegging
Nukatap & Handle
$29.95
What makes the NUKATAP different among the older manufactured styles of taps on the market?- First pour foam reduction in thermal mass- Improved laminar flow- Most sanitary forward sealing design - Longer life seals- Move versatile tap handle angle
Stainless Stepless Clamp
$0.95
Stepless clamps are designed to tighten in an exact circle around the hosing, simply use a crimping tool or the middle cutter on your pliers to crimp (not squeeze) the stepless clamp closed. Let us pimp your crimp with these stainless steel stepless clamps.
Stainless Keg Dip Tube - Long/Liquid
$8.95
Long/Liquid Stainless Keg Dip Tube suitable for Cornelius style kegs. Comes with a dip tube o-ring.
Stainless Keg Dip Tube - Short/Gas
$3.95
Short/Gas Stainless Keg Dip Tube suitable for Cornelius style kegs. Comes with a dip tube o-ring.
Reverse Osmosis Diverter Valve
$0.00
Most people will have under sink water supplies and various other water supplies in the house have a 1/2inch male thread. This adaptor is male to female so if you just undo your supply valve then screw this adaptor in then you can run a 1/4in tube out the side of this valve. We supply this 1/4" PE Tubing separately for...
PE Water Line/Beer/Gas 4mm x 6.3mm - 10m Roll (Reverse Osmosis)
$15.95
This is a small 1/4" diameter tubing that is often referred to as 6.5mm or 6.3mm OD to be exact. This line is made from PE (polyethylene) which is not only BPA and plasticiser free but it's also NSF approved. Suitable for pressures up to 150psi/10.3bar/1000kPa this will handle mains water pressure no problem at all. This is also compatible...
Reducing Socket (Stainless Steel) ~ 1/2inch BSP X 1/4inch BSP
$5.95
Used to reduce the size of a pipe system and are connect to two threaded U-PVC pipe fittings, with one diameter smaller than the other.
Post O Ring
$0.95
Replacement O-Rings for ball lock or pin lock keg posts. Sold individually or in packs of 10. Pls note that the O Ring does not come with the 50c piece, it is just for size recognition
NukaTap Stout Spout
$10.95
The Stout Spout has a removable creamer/aerator disc inside, it is specially made to serve beers infused with nitrogen gas, and allows the nitrogen gas to flow smoothly through the faucet with the beer to create a smoother, creamier beer. Simply un-screw the regular nozzle and screw on the Stout Spout and use as you would a stout tap.
Nylon Composite Pluto Gun
$24.95
The pluto beer guns have become an iconic beer dispensing tool used throughout the industry. Changes have been made to a robust nylon rather than the ABS they were previously. This new nylon/stainless composite beer guns have a stronger nylon plastic body with stainless steel barb, piston and spring. The barb it comes with suits standard 4mm-6mm beer line.
NUKATAP SS Auto Close Spring
$2.95
The NukaTap SS can be used with an Auto-Close Spring. By inserting the spring between the shank and tap body this will cause the tap to automatically close when you let go of the handle of the tap handle. This is perfect for customers who may not be diligent enough to remember to completely turn off the tap after each...
NukaTap Threaded Growler Spout
$5.95
Convert your NukaTap Tap into a barbed fitting to attach your silicone filling hose pre attached without opening the Kegerator Door. YES PLEASE! Also fits genuine Intertap - SS and Intertap - FC models.
NUKATAP SS - Short Shank without Nut, Angle Barbtail and Collar
$10.95
Designed to be used with plumbed fonts such as the Cobra Fonts or any 5/8" Female Font that requires a 25mm long shank. Please note they do not come with a Barbtail, Nut & Collar.
Nuka Tap Seal Kit
$9.95
The majority of these seals would never normally need to be replaced. But in the event of accidental loss / extreme commercial use. Please replace said washers with the addition of food-grade lubricant to ensure their longevity.Includes:- The Nuke- Tap Coupling Washer- Bonnet Washer- 2 x Cup Seal- Nozzle Washer
MFL Thread Manifold Gas Line Splitter with Check Valves (1/4" thread)
$20.95
These gas manifolds are rated to 100psi and include multiple gas line outputs and ball vales with MFL thread. We highly recommend using the duo tight FFL push in fittings for these manifolds. You can also attach a Gas Ball Lock Post with 1/4 Inch Bulkhead Assembly if you want to be able to easily disconnect/reconnect a gas line. Alternatively you can...
Mini Co2 Charger ~ Complete Set
$45.95
This is a great Co2 Charger set consisting of the following: Mini Co2 Charger Mini Co2 Charger – MFL to Barb Mini Co2 Charger – Type 30 Nut
Mini Co2 Charger ~ MFL to Barb
$2.95
MFL to 6MM Barb Mini Reg Adaptor Mini regs are handy for attaching straight to your gas disconnect on your keg. But what if you want to put your mini reg on a larger gas cylinder? Easy. Simply use this handy little threaded barb adaptor for screwing into your mini reg's MFL output. Then attach gas line to the barb...
Wrap Around Drip Tray
$17.95
Light weight ABS plastic drip tray with hexagonal honeycomb reinforced strength. This dishwasher safe drip tray is easy to use, has reasonable volume and catches drips from your font effectively. The semi circular cut out suits a font or flange that is up to 120mm diameter.
GF30 Self Sealing Coupler
$21.40
A self sealing coupler with sealing plastic o-ring, for use with the GF30 Conical Fermenter. *Note this is appropriate for replacement of connections for only one side.
Liquid Ball Lock Post with 1/4 Inch BSP Bulkhead Assembly
$10.95
These ball lock posts include a 1/4 inch BSP thread so you can attach it to a wide range of other fittings. The posts include a 20mm long thread, an o-ring, poppet, locking nut and short dip tube. Longer dip tubes can be purchase separately. This would enable you to make a keg out of any pressure vessel if you wanted to. ...
Keg King MKIII CO2 Regulator
$79.95
Features •Dual gauge - (0-80psi) •Australian standards •Easy to adjust •Included ball lock •Safety pressure release valve
Kegland Inert Gas Regulator
$34.95
This regulator is designed to suit our disposable - - Nitrogen (N2) Cylinder - Argon (AR) Cylinder - Carbon Dioxide (CO2) Cylinder * duotight Fitting compatible To use a push in fitting on this regulator you will need to order 1 x duotight FFL x 8mm Push in
Keg Coupler D-Type (Stainless Steel)
$44.95
D-Type Keg Coupler, also known as American Sankey coupler to fit CUB, Fosters, Carlton Draught and VB kegs. Full Stainless SteelIncludes:- Beer and Gas valve- Beer and Gas barbs
Keg Coupler A-Type (Stainless Steel/Alloy)
$49.95
Also known as German slider To fit Tooheys, Coopers and XXXX kegs. Includes:- Beer and Gas valve- Beer and Gas barbs (6mm)Please note most A-type kegs are too tall to fit in our Series 3 or 4 kegerators without the low profile elbow bend on the coupler (sold separately).
John Guest equal elbow ~ 3/8"
$0.00
This fitting / adapter is used in pipe systems to connect straight sections of pipe or tube, adapt to different sizes or shapes, and for other purposes such as regulating (or measuring) fluid flow. Great for manipulating the conveyance of water or liquid in domestic or commercial environments, within a system of pipes or tubes.
Intertap PC Tap with Handle
$32.95
This Plated Chrome (PC) model is an economical choice offering all the advantages of the forward sealing design and interchangeable tap spout. The durable electroplated chrome finish is superior to most of the Chinese spray on coatings and it’s a great introduction to the Intertap range. It has a smooth bore to aid a completely laminar flow and foam free dispensing...
Hose 9mm - per meter
$3.95
This high quality beer line will keep your previous beverage in it's best possible conditoin in the process. This 6mm size is a larger size normally either used for gas or long draw keg systems. Its not recommended for direct draw kegerators as it does not apply much flow resistance. If you did use this beer line in your kegerator...
Hose 12mm - per meter
$4.95
This flexible food-grade vinyl plastic tubing is easy to handle and suited to use for all spirit beer or wine syphoning. Internal diameter of 12mmTip: Heat up the tubing end in hot water then push it on to your tap or bottling valve for a flexible and snug fit.
Hose 10mm - per meter
$4.00
This flexible food-grade vinyl plastic tubing is easy to handle and suited to use for all spirit beer or wine syphoning. Internal diameter of 12mmTip: Heat up the tubing end in hot water then push it on to your tap or bottling valve for a flexible and snug fit.
Hose 16mm - per meter
$6.95
Clear vinyl tubing is suitable for the transfer of beer, water or other liquids at low pressure. This clear flexible hose provides a visual reference for easy identification of blockages or foreign objects. Internal diameter (ID) 16 mm Non-toxic PVC Corrosion and abrasion resistant
Hose 13mm - per meter
$5.95
Great for transferring your beer from fermenter to to keg, it fits onto our standard fermenter tap
duotight 8mm (5/16) x 8mm (5/16) Push In Joiner - Female
$5.95
Looking for high quaility push in fittings that will seal tight? Duotight are the push in fitting with superior sealing capacity due to the double o-ring sealing design. Why do we use Double O-rings?The secret to our superior sealing performance is not just the fact that we use high quality EPDM o-rings but also use two of them. The double...