Shopping Cart

0

Your shopping bag is empty

Go to the shop

Products

filter

1 2 3 4 5 6

G-Pot Kits

$109.95

G Pot Kits provide a complete indoor air pot/drainage/trellis kit solution in one convenient and inexpensive package. G Pot kits are available in small or large formats (27L or 38L pots).  G-Pot Kit Small: 2 x G-Pot Base 480mm  1 x Pot Grid 50L  1 x Trellis Kit  1 x Geo Pot 27L  1 x Free Flow Ring Mini  G-Pot...

Garlic Granules

$5.95

Granulated garlic is dried garlic that has been coarsely ground to a sand-like consistency. It's made by drying fresh garlic cloves in an oven, then grinding the cloves into garlic granules with a spice grinder.

Gas Ball Lock Post 1/4in Bulkhead Assembly

$10.95

These ball lock posts include a 1/4 inch BSP thread so you can attach it to a wide range of other fittings. The posts include a 20mm long thread, an o-ring, poppet, locking nut and short dip tube. Longer dip tubes can be purchase separately, this would enable you to make a keg out of any pressure vessel if you wanted...

Gauge Guard - Stainless Steel for MK4 Regulator (Bump Guard)

$19.95

Are you like us?  Do you sometimes push in your Kegerator too hard against the wall with the gas bottle on the back?  Maybe you've broken a dial in the process of dropping or transporting your gas bottle with the regulator attached. Or perhaps you're in a busy cafe/bar and someone needs to change over the tank and they drop...

Geopots

$17.95

Geopot is a breathable fabric plant container that air prunes your roots when they reach the edge of the container. This air root pruning process forces your roots to branch out with more fibrous feeder roots, which are more efficient in taking up water and nutrients. The porous fabric allows air into the root zone and provides great drainage, creating a...

GF30 Self Sealing Coupler

$21.40

A self sealing coupler with sealing plastic o-ring, for use with the GF30 Conical Fermenter.  *Note this is appropriate for replacement of connections for only one side.

Gin Basket ~ 140mm

$25.95

140mm long stainless steel mesh cannister with a hook to hang from the thermowell inside the pot head condenser. Holds approximately 60g of mixed botanicals. Comes with instructions and packaged in a carton with hang tab.

Glass Measuring Cylinder - 250ml

$10.95

These Measuring Cylinders are made from the same laboratory borosilicate as our Erlenmeyer Flasks.The measuring cylinders have volume of 250ml with 2ml graduations for accurate measurements. Please Note: Due to breakages, postage of these items is unavailable. In store purchases only

Glass Test Tube

$5.95

Glass test tubes that can used over and over again. Suitable for a range of uses in measuring your brew. The graduations will allow you to measure liquids more accurately. Please Note: Due to breakages, postage of these items is unavailable. In store purchases only. Stock may vary compared to what is advertised due to stockists and supply.

Glycerine

$7.00

Glycerine is a must needed additive to all spirits, liqueurs and schnapps. Glycerine smooths out 'mouth bite' in your higher percentage spirits like rum, bourbon, scotch, vodka etc. It can also be used to add viscosity or body/thickness to your liqueurs and schnapps. Hooked on Brewing recommends the use of this with all spirits and liqueurs. Although this does not...

Go Green

$25.95

Go Green is designed to prevent and restore common deficiencies in plants. It is a scientifically formulated liquid fertiliser, with added calcium, magnesium, nitrogen and iron, which helps to reduce discolouring, rust spots and tip burn. Features: 4 in 1 deficiency correction Contains fulvic acid and chelated minerals for enhanced nutrient mobility Can be used as a foliar spray Fast...

Graduated Measuring Jug

$14.95

This 5L multi-purpose graduated measuring jug is made from tough food grade polypropylene. This jug provides accurate easy to read measurements and is suitable for Beer Brewers  This jug has accurate calibrations for easy reading. The image below is for advertising purposes only and stock may vary depending on supply, however the jugs are always 5 litres.

Grain Mill 3 Roller

$230.00

The Grain Mill (3 Roller) is constructed using materials that will last a lifetime. Cold rolled steel for the rollers, 6061 Aluminum body and hopper with long lasting hardened steel bearings.The 3 roller design has the main advantage that it draws in the grain better and gives improved milling throughout.

Grain Mill Bamboo Base Board

$25.00

This is a Bamboo Base Board for the Malt Muncher 2 Roller or 3 Roller Grain Mill. Perfect for slotting over a food grade bucket, or building your own little shelf on wheels.

Grain Order Sheet

$0.00

If you are wanting to order Grain Online, please complete the attached order Sheet. SHHB doesn't charge for milling of Grain. 

Grainfather Conical Fermenter ~ 30lt

$971.95

Ferment like never before! The Grainfather Conical Fermenter gives the brewer professional fermentation control, just like the commercial breweries. Fermentation is arguably the most important part of producing a good quality beer. A good fermentation environment starts with a clean and sterile fermenter, has a consistent controlled temperature base and exposure to oxygen is minimised.  The Grainfather Conical Fermenter provides...

Grainfather Electric Grain Mill, Mounting Board

$467.95

The ultimate bundle for crushing fresh grain at home. This product package includes the Grainfather Electric Grain Mill and the Grain Mill Bamboo Mounting Board. Simply mount the mill onto the board and place it over a bucket to catch your freshly crushed grain.   #10169K

Grainfather G30

$1,184.95

The Grandfather Connect All in One Grain Brewing System is your all-in-one brewing system to make beer from grain. The sleek look, user friendly design, allows you to mash, sparge, boil and cool, all in the one system. Fully electric, and self-contained. Includes:  304 grade stainless steel superior body Tempered glass lid Magnetic drive pump (5 watt, 1800 RPM) Pump filter...

Grainfather G30 Graincoat

$99.95

This heat insulation jacket is designed to be used with the Grainfather to keep heat contained in the boiler and maintain a constant temperature during your brew during cooler times of the year. - Material -SBR Foam (11mm thickness).- Designed for the Grainfather for heat insulation, especially in colder temperature areas.- Easy to wipe clean, polyurethane outer layer, and machine...

Grainfather G30 Top/Bottom Pump Silicone Tubes

$18.95

Replacement Pump Silicone Tubes x 2 for The Grainfather     #10278

Grainfather G40

$1,798.95

The Grainfather G40 brewing system has a bigger capacity and better connectivity. Produce up to 40L (11 US Gal) of beer from one brew. Connect your mobile device to the smart controller with built-in wireless control via the Grainfather App, for step-by-step brewing and access to 1000s of recipes. Features: Sleek 304 grade stainless steel body Heats wort evenly with...

Grainfather G70

$2,199.95

The original, all-grain brewing system is now bigger and better.  If you’re looking for Grainfather quality in a larger capacity with app integration and smart brewing technology, the G70 is your true brewing companion. Fully compatible with our Conical Fermenter and Glycol Chiller for the ultimate advanced brewery setup.

Grainfather GCAST

$105.95

GCAST is a wireless bridging device that allows you to break free from Bluetooth limitations when brewing with the G30 and the Grainfather App.   #10853

Grainfather GF30 Fermenter Basic Cooling Edition

$1,038.95

The Grainfather GF30 Conical Fermenter Basic Cooling Edition includes the GF30 Conical Fermenter and Cooling Pump Kit. The Grainfather GF30 Conical Fermenter gives brewers more flexibility and freedom during fermentation than ever before! Featuring a digital temperature controller that has built-in wireless control, allowing the unit to connect to the Grainfather App via a mobile device. Add fermentation tracking devices and manage...

Grainfather GF30 Fermenter Coat

$49.95

The Grainfather GF30 Conical Fermenter Coat is the perfect fitment for those in a climate that experiences high condensation rates when using either using the Grainfather GC4/GC2 Glycol Chiller or Cooling Pump Kit to lower the fermenter’s temperature. Features: Made from high quality 5mm thick SBR foam. Consists of two independent sections for both the main body and the fermenter cone for...

Grainfather GF30 Fermenter Cooling Connection Kit

$72.95

The Fermenter Cooling Connection Kit allows you to connect additional Conical Fermenters to the Grainfather GC2 or GC4 Glycol Chillers. One GF30 Cooling Connection Kit is required per additional fermenter.

Grainfather GF30 Fermenter Pressure Transfer

$121.95

The Pressure Transfer easily attaches to the Grainfather Conical Fermenter, for a clean and simple way to transfer your beer without the need to lift the fermenter to perform a gravity fed transfer.   #10149

Grainfather Glycol Chiller

$1,856.95

Temperature control is one of the most crucial elements for producing a good quality beer. It needs to be regulated and stable throughout the whole fermentation process to ensure the yeast doesn't get stressed and ferments correctly to get the right flavour profile. With the ability to individually power and control the temperature of up to four Grainfather Conical Fermenters,...

Grainfather Perforated Plate Seal

$8.60

If you have misplaced your top or bottom perforated plate seal or this has become worn, you can purchase a replacement here.NOTE: If you have one of the earlier Grainfathers which doesn't have a silicone seal on the bottom perforated plate, this will not fit your plate.

Grainfather Performance Cleaner

$23.95

This High Performance Cleaner is specially formulated to be used with the Grainfather. It removes hard to clean proteins from your Grainfather without the need for tedious scrubbing. Perfect for cleaning hard to reach places such as the Counter Flow Wort Chiller, pipes and pumps.This is suitable for soft (copper) and hard (stainless steel) metals which not many other cleaners...

Grainfather Pump Housing

$3.55

Pump housing for the Grainfather G30

Grainfather Sparge Water Heater 18L

$258.95

This Sparge Water Heater is a temperature controlled urn that allows you to heat up to 18 L of water. This makes the process easier, start heating your sparge water when you begin the mash to ensure it is ready for when you need to sparge. Once water is at required temperature, it will hold that temperature until changed or...

Grainfather Sparge Water Heater 25L

$274.95

The 25 L Sparge Water Heater is designed to be used with Brewing Systems of up to 40L, making it the perfect companion for the G40 or the G30.   #10991

Grainfather Sparge Water Heaters

$185.95

The Sparge Water Heater allows you to heat water and hold the temperature until you are ready to sparge.   #10242

1 8 9 10 11 12 33